Eagle Pair® brand protective laser safety goggles for combined 190-540nm & 800-1700nm wavelengths. These goggles have 20% visible light transmission, protect to a level of OD 5+ (reduce the intensity of 190-540nm and 800-1700nm laser light by a factor of 100,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm blue, and 532nm DPSS green lasers that may also produce significant amounts of unfiltered 808nm and 1064nm infrared light. These Eagle Pair goggles may be used when looking at the spot created by a 100 watt or lower power laser on a non-reflective surface. However, you should NEVER look directly into any laser beam or its direct reflection even when wearing laser safety goggles. Eagle Pair laser safety goggles come with a cleaning cloth and protective case (case and cloth appearance may be different than that shown). Note: These goggles are for personal use only, not for any commercial use that is regulated by OSHA.
At this time, these goggles are NOT recommended for use with Argon, Krypton or other lasers that output greater than 1 watt of power in the wavelength range of 505 to 517nm.
NOTE TO CUSTOMERS OF SL-GLG1X EAGLE PAIR® GOGGLES PURCHASED PRIOR TO 2020: It has been determined by Eagle Pair® that some SL-GLG1X Eagle Pair® 190-540nm & 800-1700nm goggles manufactured prior to 2020 may have a dip in the absorbance curve between 505 and 517nm wavelength of about OD3 instead of OD5. Eagle Pair® has provided us replacement lens filters for any Survival Laser customer of these goggles that requests them. Customers can reach us about the replacements via the store contact page.
Click here to download a current OD vs nm chart for these goggles.
I would give it 10 stars - path of light - Tuesday, June 22, 2021
Thank you Laseranon for recommending this site to me and thank you Survival Laser for protecting my eyes on many occassion. Thank you from Brazil!
Perfect protection goggles for laser cleaning work. - - Thursday, January 14, 2021
It is the right protection goggles for laser cleaning work. I work with a 100watts laser cleaner on very reflective surface. The machine came with a pair of goggles but the light from the ablation of the rusted surface was too bright. After a few seconds of laser use i would get blind spots from my vision. But now thanks to this new goggle which was suggested to me by Gary i could work longer without getting any blind spot in my vision. Thanks a lot. I would recommend this goggle to others but also recommend others to get advice from Gary. It took about one week for the goggles to arrive to japan even during this covid-19 period. I used the Priority Mail Express International.
Worth every penny. - Dr. Wood - Wednesday, March 4, 2020
Blocks a 1.3W Ultraviolet/blue laser with ease, leaving just a small dot of visible light. A 700mW green laser was reduced nicely as well.